Ramsey SG560WT Audio/RF DDS Signal Generator Review
Ramsey SG560WT Audio/RF DDS Signal Generator Feature
- DDS and SMT technology
- Frequency range 0 Hz to 5 MHz with 0.1 Hz resolution
- 0 to 10V peak to peak output level
- Sine, Square, or Triangle waveform output
- Non-volatile memory
Announcing our NEW SG560 Signal Generator! We increased the frequency range all the way up to 5MHz and all the way down to 0Hz (yes, we mean zero...or DC!) continuously in 0.1Hz steps across the entire range! Next we increased the output level to go up to 10V peak to peak in the sine wave, square wave, or triangle wave forms. You can also provide a DC offset to the output allowing you to create a wide variety of signals for testing and experimenting. Recreate TTL, 4000 series logic levels, low voltage logic levels, AC waveforms with a DC component, or just plain AC signals. The SG560 contains a 10 bit DDS and filtering for a low noise, accurate low distortion output. The output stage utilizes the latest technology in digital modems and high power, high bandwidth DSL modems and is capable of a direct output of 2.5W! You can even generate carrier signals in the AM band for testing AM receivers and circuits. A jumper option for zero ohm output impedance allows for true output terminal metering. But watch out, 2.5 watts is enough to damage incorrectly connected circuits. Surface mount technology is used throughout the SG560 making it extremely reliable and accurate. Frequency is entered directly on the sealed membrane keyboard and adjusted with a precision rotary encoder with an oversized knob. Both frequency and output level are displayed on a high contrast, two-line LCD display. The SG560 operates on 8 to 16VDC and includes a standard 110VAC power adapter.
No comments:
Post a Comment